Joint Jacket – POP Display


Clear selection
SKU: JJ-POP. Categories: , .

Product Description

Now you can purchase the Joint Jackets for your store or shop, buy in bulk and save!

We are offering 30 piece bins of Size 1, Size 2, Size 3, and Mixed in a sexy clear PET Re-Usable and Recyclable container.

You have a choice of 4 different assortments:

Size 1
30 Pieces – 1310, 1310 BC, 1330, 1330 BC, 1350, 1350 AAM, Dana 30, Dana 44, GM 3RL, 7260, Mechanics 2, Toyota, & MORE

Size 2
30 Pieces – 1480, Dana 60, Dana 70, 7290, & MORE

Size 3
30 Pieces – 1410, 1410 AAM, & MORE


12 Pieces – Size 1
12 Pieces – Size 2
6 Pieces – Size 3

The Joint Jacket is specifically designed for tough environments. Made from durable Polyurethane, it can handle most of what you throw at it. It’s made from specially formulated rubber that resists many chemicals, including Oil, Grease, Solvents, Fats, and Fuel. It’s Abrasion and Tear resistant well as being UV and weather resistant. Amazingly, It’s elastic enough to stretch over and over to hold tight for years.

Size 1
Fits U-joint(s) – 1310, 1310 BC, 1330, 1330 BC, 1350, 1350 AAM, Dana 30, Dana 44, GM 3RL, 7260, Mechanics 2, Toyota, & MORE

Size 2
Fits U-joint(s) – 1480, Dana 60, Dana 70, 7290, & MORE

Size 3
Fits U-joint(s) – 1410, 1410 AAM, & MORE

Abrasion resistant
Parts made of polyurethane will often outwear other materials by a margin of 5 to 1 when severe abrasion is a factor. It has been proven to be vastly superior to rubber plastics and metal in many applications.

Oil and solvent resistant
Polyurethane has excellent resistance to oils, solvents, fats, greases and gasoline. All the stuff your U-joint will encounter.

Load bearing capacity
Polyurethane has a higher load-bearing capacity than any conventional rubber. Because of this characteristic, it is an ideal material for load wheels, heavy duty couplings, metal-forming pads, shock pads, expansion joints and machine mounts.

Tear resistant
Tear-strength ranges between 500-100 Ibs./linear inch, which is far superior to natural rubbers. As a result, urethane is often used as drive belts, diaphragms, roll covers, cutting pads, gaskets and chute liners.

Weather resistant
Polyurethane has outstanding resistance to oxygen, ozone, sunlight and general weather conditions.

Offers extremely high flex-life and can be expected to outlast other elastomer materials. Dust boots, bellows, diaphragms, belts, couplings and similar products are made from urethane for this reason.

Heat and cold resistant
Continuous use below 225°F is within its allowable specifications. At low temperatures, The Joint Jacket will remain flexible down to -90°F.

Who Uses The Joint Jacket?

  • Automotive
  • Off-Road
  • Industrial
  • Oil Industry
  • OEM Manufacturers
  • Drive Shaft Manufacturers
  • Recreational Users

… and many more!

The Joint jacket offers big protection for little money.

  • Oil, Fuel, Solvent, and Acid resistant.
  • More puncture resistant than most natural rubbers.
  • Store your Universal Joints without worry, in your trunk, under your seat, or in the shop.
  • Slip it over your spare Drive Shaft or Axle U-Joint without using the silly tape.
  • Works in pairs to protect all 4 Caps, or use just one Joint Jacket when you have only 2 Caps vulnerable.
  • Provide damage protection when transporting and handling.
  • Use during Axle or Drive Shaft installation to prevent accidental loss or damage.

Care and Use:

  • NOTE: Some versions of the Joint Jacket Fit tight and some loose. This is intentional, it allows for variations in U-Joint series cap size.
  • DO Wash with soap and water to remove mild dirt and debris. Don’t use Acetone!
  • DON’T get caught using electrical tape on your Bearing caps, if so you will soon find out why.
  • DO buy as many as you want, we offer bulk pricing too.
  • DON’T let your friends use electrical tape either, they will blame you.
  • DO check out the Additional Information section for more Scientific Jargon…

Get yours today, before it’s too late!

Additional Information

Weight 32 oz
Dimensions 8.75 x 5.75 x 5.75 in

Size 1 – 30 Pcs, Size 2 – 30 Pcs, Size 3 – 30 Pcs, Mixed – 30 Pcs


There are no reviews yet.

Be the first to review “Joint Jacket – POP Display”